Open App

Speed Limiter

Use the Speed Limiter tool in ScriptCompiler to shorten funscript strokes that move faster than a device can follow. Pick a Handy, Handy 2, Keon or Autoblow Ultra, or set the speed yourself.

On this page

Overview

Speed Limiter shortens strokes that move faster than a device can follow. Devices have a top speed. Ask for more and they lag, skip, or stall. Pick your device and the tool uses its safe top speed. Or choose Custom and set the limit yourself.

How It Works

  1. The selected points are walked in time order.
  2. For each point, the tool checks how far it moves from the point before it and how much time it has.
  3. If the move is faster than the limit, the point is pulled closer to the one before it until the move fits.
  4. The next point is checked against the point that was just fixed.

Timing never changes. Only positions do.

Parameters

Parameter Range Description
Device Custom, Handy, Handy 2, Handy 2 Pro, Handy 2 Pro Overclock, Keon, Autoblow Ultra The device the script will play on. Its safe top speed is used. Custom shows Max Speed.
Max Speed 50 to 1000 units per second Fastest allowed move. Only used with Custom. A full 0 to 100 stroke in 250 ms is 400.

Device Speeds

Speeds are in position units per second. 100 units is one full stroke. The numbers assume the device is set to its full stroke length.

Device Top speed Where it comes from
Handy 400 The maker caps the firmware at 400 mm/s over a 100 mm stroke.
Handy 2 320 The same 400 mm/s cap over the longer 125 mm stroke.
Handy 2 Pro 360 450 mm/s cap over 125 mm.
Handy 2 Pro Overclock 640 800 mm/s with the safety limit turned off in the Handy app.
Keon 350 Owner reports range from 230 to 520. This is the middle.
Autoblow Ultra 400 Community measurement. The maker lists 220 strokes per minute.
Shorter Stroke, Faster Script
If you set a shorter stroke range in the device app, each unit is a shorter move. The device can then follow a faster script. Choose Custom and raise the limit.
Ask the AI
The AI assistant can do this for you. Ask it to make the script play right on your Keon and it runs Speed Limiter with the Keon speed.

Use Cases

A Script for Your Device

You made or downloaded a script and want it to play right on your device. Select all, pick the device, apply.

Generated Patterns

A pattern came out too fast. Limit it instead of redoing it.

Tracking Output

Tracking sometimes jumps. The limiter turns a wild jump into a move the device can make.